Monday, 3 August 2015

Cctv camera connection

ADT - Most Reputable Home Security Monitoring Company - Reviews. Leading B2B Direct Supplier. Keep It Simple - Do It Yourself. How does a CCTV camera system work? Who created CCTV cameras?


Can I connect a security camera without DVR?

How it Works The analog security cameras ( CCTV ) are hard wired to the video inputs of the quad multiplexer using RGcoax cable. The important thing is to identify if the camera uses a traditional CVBS technology, you can check that information on the camera itself, in the catalog or product manual. The LAN port is used for other network devices, such as computers, IP cameras or NVRs to connect to. From the very beginning. How to connect a security camera to a surveillance DVR.


The male BNC connector on the cable very simple pushes and twists on to the female BNC input on the back of the DVR. Next, grab the other end of the cable. Attach the BNC connector to the security camera.

Again, it simply pushes and twists on. Next attach the power side of the cable to the power input of the camera. Connect a network (Ethernet) cable from the camera to the router to establish a data connection between the camera and the router. Give the camera about 2-minutes to boot. Connect the security camera NVR to TV with the HDMI cable.


Power the NVR with the power adapter. Turn on the TV, and the live view will be shown on the screen. The NVR and the cameras will automatically connect to each other on its own proprietary network and start to communicate with each other without Internet access (without connecting to your router). Determine the method of mounting the camera.


Plug the supplied receiver into the wall adjacent to the computer. Use our IP Finder Config Tool to find the camera on your local area network (LAN). ANSWER= you have CCTV cameras in your house or office and you have to watch the footages in your big monitor which is not so easy. Make sure your security cameras are charged.


Find out the security camera address on your computer. Change your computer’s IP address to the same network prefix of the camera. The instructions are based on certain models but are likely the same or close to the same for other models of D-Link and LinkSys routers.


First, you need to power up your IP camera and the NVR system.

CCTV Camera Pros has DDNS setup instructions for D-Link and LinkSys routers. Usually your router will have one port for the internet connection. This port is usually away from the other ports on the back of the router which are for the devices which will be connecting to the internet. Connect your DVR to one of the data ports of your router.


Use a catcable for this connection.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts