Wednesday, 20 January 2016

Hikvision nvr configuration

How to add Hikvision NVR into milestone by Universal driver? What is Hikvision SADP tool? Is a Geovision camera and a Hikvision NVR compatible? Before setup the DVR to start recording your cameras,.


Check the DVR Hard Drive.

Connect a monitor and a mouse to the Hikvision DVR. Configure the IP, Subnet Mask and Gateway. Open a Web Browser and insert the DVR IP. Follow the step with us and get your hikvision dvr on internet. The unit has its own unique IP address on my network when plugged.


All Hikvision Hardware NVR’s have a fixed number of channels. Licenses cannot be purchased to increase the number of supported channels.

Upgrading the Firmware on the Hikvision DVR and NVR. Setup Devices with the SADP Tool. Ltd Camera available to add. Set Router In the router menu of “Forwarding—Virtual Servers”, click “Add New” to add at least ports, which is in accordance with that set in DVR. The IP address is the same as that of DVR.


Also, set the time in the manual time. After all, settings, click save button. Adding the IP Cameras to NVR. Right-click the mouse at NVR screen when you in the live view mode to show the right-click menu of NVR. Everything must be done step-by-step to assure that the basic stuff is working before move on to the next level.


NOTE: Please see the quick start guide on how to set the NVR or DVR network settings. The cameras are accessible and configuration is editable via the Hikvision Live View device log-in. This is best way to configure hikvision camera on internet for online view and hikvision give us this facility to access their camera through internet from worldwide area.


It can be configured by static IP address or if you have no any static IP address so hikvision can be configured by dynamic IP address. Every Hikvision device has access limit.

If the total number of people trying to visit and preview the device (recorder such DVR or NVR or even a standalone IP camera) via the Internet is more than the limit, the rest would be unable to preview. Use a mouse to login or unlock the device. Set the same settings as shown above. If everything is set up correctly, you should see the message “DDNS is normal”. To do Hikvision cloud storage configuration you have to connect your DVR or NVR to the internet and follow the steps below and then you are able to save your recording on cloud storage.


On the HIKVISION DVR go to settings, network configuration. Now go from the general tab to the :Platform access tab. Status should show offline. Uncheck enable at the top of the screen and apply. Next enable the option again and accept the terms and you should now see the status show:Online.


The app should work along with online features. Current status: cameras are configured and connected directly to a HIKVISION NVR. These are running like a charm.


The NVRs own time settings will take precedence over those of the camera and any recordings made will use the NVRs timestamp so ensure it is correctly set! Restoring default passwords. SADP stand for search active device protocol.


Devices include DVR, NVR , IP camera and any other IP device manufactured by Hikvision. It is a free tool so everyone can use it to find the IP address of the IP camera.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts