Trace heating

Electric heat tracing, heat tape or surface heating , is a system used to maintain or raise the temperature of pipes and vessels using heat tracing cables. Trace heating takes the form of an electrical heating element run in physical contact along the length of a pipe. The demands placed on heat tracing systems vary based on the design parameters specific to each application.

Manufacturers who must keep product flowing need a heat trace partner they can trust. That’s why so many count on Chromalox for the right mix of application engineering, products and site services for their Process Temperature Maintenance, Freeze Protection, and Winterization needs.

Trace heating can be used to protect pipes from freezing, maintain the temperature of a hot water system, or maintain process temperatures for smooth and efficient running of process plant equipment. Engineers and installers using trace heating will always have their preferences as to the type of trace heating cable to use. Whether you are looking to source a vital trace heating system for a nuclear power plant or frost protect the pipes in your garage, we have the answer. Our pre-made trace heating kits are the perfect solution to prevent pipes from freezing.

These pre-made frost protection kits use a self regulating trace heating cable which limits its output per meter by using a variables resistive compound within the cable to prevent overheating and to ensure efficient operation. Trained Engineers Here to Help You Find High Quality Products. Leading Heat Trace Specialists.

What applications can Trace heating be.

Chromalox cables provide trace heating to commercial, industrial and hazardous area location pipework, tanks, vessels and drums – ATEX certified heating cables are available for safe installation to process pipework requiring temperature maintenance in Zone and Zone hazardous areas. This kit is connected to a thermostat so that the trace heater only switches on when the temperature drops below degrees C. Next to our range of heating cables, we offer a full suite of control and monitoring products and connected solutions for virtually any application. How We Protect People, Processes and Assets.

Consideration shall be given to the maintenance of the system and process equipment, to energy efficiency, and to testing of the installed system for operational satisfaction and safety. Vent RAYCHEM solutions improve utilization, lower installation and maintenance costs, and minimize downtime. Note: A copy of any Heat Trace ATEX certificate or any other approvals certificate can be provided on request. Electric trace heating , heat trace or surface heating , is the application of a compensating heat source used to temperature maintain or raise pipes, surfaces and vessels.

In the form of an electrical heating element, trace heating is run in physical contact with the desired surface. The installation of a trace heating system can help reduce running costs and lowers the risk of critical areas becoming damaged in harsh cold environments. These thermal solutions are a cost-effective alternative to fully jacketed piping an in comparison to steam tracing, offer greater heating capacities and reliability. TRACE 7complies with Appendix G for Performance Rating Method of ASHRAE Standard 90.

Trace Heating is used to maintain the temperature of pipes, roofs, gutters and ramps. LEED analysis, and was the first simulation software approved by the IRS for energy-savings certification (EPAct). Detecting cable damage prior to the application of insulation can prevent additional labor costs.

XL- Trace heating cable selection.

Inspect the heating cable and connection kits to ensure there is no in-transit damage. Condensate Trace Heater Kits. Full free design service.

We offer a fast turnaround free design service with no obligation, no matter how big or small your application is. We supply and install Raychem trace heating , heat tape or surface heating for frost protection or to maintain or raise the temperature of pipes and vessels.