Free delivery to greater LA metro area. Need Help or Have Questions? Contact Us for More Information. Fire Extinguisher Use and. How to use a fire extinguisher?
What is the proper way to use a fire extinguisher in? What are the four steps for using a fire extinguisher? Get everybody out first.
You shouldn’t try to tackle a fire on your own with a fire extinguisher. Use a fire extinguisher for small, contained fires only. Evacuate a room that’s filled with smoke.
Use the right fire extinguisher. The PASS method works for many common fire extinguishers.
We’ve explained the four steps of the PASS method for using a fire extinguisher below. Most fire extinguishers operate using the following P. This will also break the tamper seal. Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire. Squeeze the handle to release the extinguishing agent.
A im low toward the base of the fire. S queeze the lever slowly. S weep the nozzle from side to side at the base of.
ABC extinguishers use the dry chemical monoammonium phosphate as the extinguishing agent. Using a sweeping motion, move the fire extinguisher back and forth until the fire is completely out. Operate the extinguisher from a safe distance, several feet away, and then move towards the fire once it starts to diminish.
Properly using a fire extinguisher in the workplace. Don't be caught unprepared. OSHA requires employees to be trained in fire extinguisher use on an annual basis, at a minimum. Sweep the extinguishing hose or.
There is also a safety tie keeping the pin in place. To operate a fire extinguisher properly, use the acronym “PASS”.
PULL: Pull the pin located at the top of the device , it is usually attached to a plastic or metal ring. The pin is there to prevent accidental discharge. Knowing how to operate a fire extinguisher could save your life in an emergency.
Aim at the base of the fire , not the flames. This is important - in order to put out the fire , you must extinguish the fuel. It is important to use the correct extinguisher for the type of fuel! Using the incorrect agent can allow the fire to re-ignite after apparently being extinguished successfully.
Water and Foamfire extinguishers extinguish the fire by taking away the heat from the fire. Foam agents also separate the oxygen from the fuel and heat. Employee responders to a fire also should be trained to adhere to the following protocol: If appropriate, sound the fire alarm or call the fire department immediately. Before approaching the fire , determine an evacuation route safe of flames, excessive heat and smoke.
Aim the extinguisher at the base of the fire.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.