Wednesday 20 December 2017

Fm200 fire fighting system pdf

FM-2fire fighting effectiveness is achieved through heat absorption and through direct chemical means (action of the fluorine radical on the chain reaction of a flame). FIRE DETECTION AND FM-2SUPPRESSION SYSTEM A. SCOPE: This specification outlines the requirements for a cross-zoned detection and total flooding FM-2fire suppression system. The work described in the specification consists of all labor, materials, equipment, and services necessary and required to complete and test the system.


Use extinguishing agent appropriate to other materials involved.

Keep containers and surroundings cool with water spray as containers may rupture or burst in the heat of a fire. Clean Agent Fire Extinguishing Systems. When properly designe the FM-2system can suppress a surface burning fire in Class A, B, and C hazards. The fire fighting ability of the FM-2system is achieved through heat absorption and direct chemical means (action of the fluorine radical on the chain reaction of a flame).


The FM-2fire suppression system is clean. When the FM-2fire suppression system discharges, it releases as a gas rather than as a foaming agent, so there’s no leftover residue to damage even the most sensitive equipment. Since there’s no clean up, you can quickly get back to business with all your systems intact. The typical concentration of an FM2system is normally between 7.

What are the benefits of FM2fire suppression system? Why the FM 2fire suppression system is a good fire killer? FM-2Fire Suppression System protects what matters most, your people and your critical data and equipment. FM 2GAS Cylinder Release Valve Pressure Gauge Manual Activation.


This makes it a highly effective fire fighting agent. HFC 1( Ecaro ) Is also called as Pentafluroethane or Genetron HFC 1or Khladon 1or Suva 1or Freon 125. Fires are immediately suppressed by the agent, which otherwise known as HFC227ea.


NAFFCO supplies a complete selection of fire protections systems that will improve the safety of your property in Dubai and the Middle East. We manufacture every fire system in accordance with international standards. Our company supplies fire protection systems such as: water-base gas-base foam-base powder-based and wet chemicals systems. Hazardous prevention measures : Protect from sunlight.


Store in a well -ventilated place. CHAPTER - FIRE SYSTEMS INSPECTION, TESTING, AND MAINTENANCE (ITM) - b. Advocate prompt repair of fire protection and life safety systems and equipment by tracking deficiencies and ensuring required actions are completed in a timely manner. Office of Facilities Management and Reliability (OFMR) a. Fm2(HFC-227ea, Heptafluoropropane) is a colorless, odorless and low-toxic gas which is liquefied stored in cylinders and dispensed into the hazard as a non-conductive vapor to put out the fire. Inspection and Testing Program Fire Protection Equipment I.

Introduction Emergencies seldom give warning before they strike. Thus, it is essential that fire protection equipment be inspecte teste and maintained to be certain it is operable at all times. Management, therefore, should establish an effective equipment inspection program.


These systems offer the most versatile clean agent suppression systems available for any business, big or small. FM-2leaves no residue on Class A, B, and C fires. Throughout the time AFire Fighting has been known as a reliable supplier of firefighting products to the respectful companies.


We supply a huge selection of fire products such as fire alarms systems , fire detection system , fire alarm kit, wireless fire alarm systems and smoke alarm to meet your needs. Janus Fire Systems is a full service fire protection company formed of professionals experienced in special hazard and industrial fire protection. We specialize in the design of FM-2, CO Foam, and Water Based Fire Protection Systems as well as Alarm and Detection.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts